How To Clean Intake Manifold? 5 Step Cleaning Guide

1776

Cleaning the intake manifoldCleaning the intake manifold is part of maintaining your car and to keep in running smoothly with less trouble. If there is excess build up in the intake manifold, a lot of issues may rise such as cutting off air to the engine, make anti-shudder valve to remain in closed position, causing no start condition and reducing performance and efficiency of the vehicle. All these problems can be avoided by simply maintaining your car and having a clean intake manifold free of carbon build up. Other people fear getting dirty and would rather buy a new manifold. The steps to cleaning your manifold are very simple to follow and you can carry out the activity by yourself. You should also consider to clean your engine, Throttle Body and fuel injector too! However, read below on to know how to clean intake manifold.


Disconnect the intake manifold

First, you need to disconnect the intake manifold from the car for effective cleaning. The most important thing when cleaning an intake manifold is to remove it the right way without harming any other part.

Scrape

After putting the intake manifold to a place a way from the car say a work surface, you can go ahead and scrape the carbon or old gasket off. Utilize a straight edge to carry out this.

Soak

For more effective removing of the soot or carbon on the manifold, you can soak it in a bucket of mineral spirits. Then, let it stay that way for around 1 to 2 hours before using a wire brush to scrub it. When you’re done, ensure that the mineral spirits should be properly disposed off.

Oven cleaner

Another way of excellently cleaning the intake manifold is by using an oven cleaner. Simply spray it on the entire manifold. Then, wait for an hour and apply a pressure washer to rinse it off. In case you decide to use oven cleaner to clean your intake manifold, don’t soak it as the oven cleaner functions excellently on its own.



Return back

After completing the cleaning, you can leave the manifold for some time to dry and return it back properly. If you find this process to be hectic, dirty and boring, you can as well buy a new intake manifold as they are usually not costly. But this process should help you clean your manifold easily and fast.

Conclusion
If you realize that you have an intake manifold that is causing you problems, simply remove it and clean it by using the above steps. Cleaning an intake manifold is very simple and you just have to follow the right steps. The most important thing is to remove the manifold rightly from its place to a surface here you can clean it from. After reading our intake manifold cleaning guide, you can go ahead and clean yours too instead of buying a new one.

LEAVE A REPLY

Please enter your comment!
Please enter your name here